Line ID: @scnc (ต้องมี @ นำหน้า)

เครื่องกลึงขนาดเล็ก รุ่น TU2404 คุณภาพดีจาก Optimum - Germany ราคาพิเศษ

฿66,000.00 ฿62,800
หัวจับโต 125 mm, จับงานโตสุด 120 mm, ระยะกลึง 450 mm, ป้อนมีดอัตโนมัติ, กลึงเกลียว มิล และ นิ้ว, กลึงองศา, กลึงเหล็ก-สแตนเลส-ไม้, ใช้ไฟฟ้า 220 โวลท์, รับประกัน 1 ปี
เหลือ 1 ชิ้น
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : เครื่องกลึงขนาดเล็ก (Mini Lathe)
  • รหัสสินค้า : 000106

รายละเอียดสินค้า เครื่องกลึงขนาดเล็ก รุ่น TU2404 คุณภาพดีจาก Optimum - Germany ราคาพิเศษ

METL LATHE SUPERIOR QUALITY AND HIGH PRECISION DESIGNED FOR DEMANDING USERS.

  • Precision manufacturing, bench induction hardened (HRC 42-52) and ground induction (maturation least 6 months)
  • Very high and constant torque
  • Equipped with a lead screw mounted on bearings lubricated threads for transactions and automatic longitudinal feed
  • To pin concentricity <0.009 mm, concentricity of the chuck <0.05 mm
  • Swivel top slide for taper turning
  • Carter turret protection, indexed turret 4 positions
  • All carriages and rails are hardened and precision ground
  • Automatic longitudinal feed
  • Double spindle mounted on tapered bearing with play catch-up
  • Wide possibilities threads through the treated steel gears
  • You can do the steps to the left
  • Equipped with a safety fuse gear
  • All bearings are guaranteed quality P5
  • +/- 5 mm lateral displacement of the tailstock for taper along
  • Controlled chuck guard
  • Power reversal of rotation right / left on the front control panel
  • Emergency Stop "punch" with low-voltage coil
  • Produced according to DIN 8606 tools (clockwork precision)
  • Comes with Certificate of Tolerances


PRODUCTS DETAIL

  • กำลังมอเตอร์(Motor power)750 W
  • ความสูงจากศูนย์เหนือแท่น(Centre height)125 mm
  • ระยะกลึงจากหัวถึงศูนย์ท้าย(Entrepointes)450 mm
  • ระยะเหวี่ยงถึงแท่นสูงสุด(Machinable diameter max.)250 mm
  • ความกว้างของแท่นเครื่อง(Bench width)135 mm
  • ความเร็วรอบแกนหมุน(Spindle speed)125 - 2000 T / min.
  • ย่านความเร็ว(Number of speeds)6
  • ความเรียวของการหมุน(Morse taper spindle)MT 3
  • ขนาดรูผ่านหัวเครื่อง(Spindle bore)Ø 21 mm
  • ระยะเคลื่อนที่ของแกนบนสุด(Top slide travel)75 mm
  • ระยะเคลื่อนที่ของแกนขวาง(Stroke of cross slide)120 mm
  • ความเรียวศุนย์ท้ายMorse( taper of tailstock)MT2
  • ระยะเคลื่อนที่ของศูนย์ท้าย(Stroke of tailstock sleeve)
  • 70 mm
  • คาวมเร็วป้อนแนวแกน Z (Longitudinal advances)0.1 to 0.2 mm / t.
  • ระยะพิตระบบเมตริก(Metric thread)0.4 to 3.5 mm / t.
  • ระยะพิตนิ้ว(TPI)44-10 TPI
  • ขนาดเครื่องจักร(Dimensions (LxWxH) 1020 x 520 x 560 mm
  • น้ำหนักเครื่องจักรสุทธฺNet Weight (gross)110 kg (130 kg)
  • อุปกรณ์มาตราฐานประจำเครื่อง(Standard Accessories)Chuck 3 jaws Ø 125 mm, fixed edge CM2, fixed edge CM3, chuck guard, rear housing, chip tray, turret 4 positions, service keys, steel threaded nuts, certificate tolerances and manual


         

Accessories
Serial No.
Item Description
Picture
Suitable for Models
S/N:3442712

Three jaw chuck ¢125 mm

TU2404

S/N:3442812

Four jaw chuck ¢125 mm

TU2404

S/N:3442020

Three jaw chuck Cl3P125 mm cast iron

 
TU2404
S/N:3442520
Three jaw chuck CS3C¢125 mm Steal
TU2404
S/N:3440511
Flange for three jaw chuck ¢125 mm

TU2404

S/N:3440512
Flange for four jaw chuck ¢125 mm
TU2404
S/N:3440552
Face clamping disc¢200 mm
TU2404
S/N:3440702
Revolving centre MT2
TU2404
S/N:3440515
Steady rest
TU2404
S/N:3440510
follow rest
TU2404
S/N:3441011
Lathe tool kit HM 8 mm, 7 pcs
TU2404
S/N:3441111
Lathe tool kit HM 10 mm, 7 pcs
TU2404
S/N:3441108

Lathe tool kit 10 mm, 11 pcs

TU2404
S/N:3441211
Lathe tool kit HM 12 mm, 9 pcs
TU2404
S/N:3441109
Collet chuck kit ER 25,1-16 mm
TU2404
S/N:3440505

Collet chuck holder for collet chuck ER 25

TU2404
S/N:3384301
Quick change tool holder SWH 1-A
TU2404