Line ID: @scnc (ต้องมี @ นำหน้า)

เครื่องกลึงขนาดเล็ก รุ่น TU2406 คุณภาพดีจาก Optimum - Germany ราคาพิเศษ

฿80,000.00 ฿72,000
หัวจับโต 125 mm, จับงานโตสุด 120 mm, ระยะกลึง 550mm, ป้อนมีดอัตโนมัติ, กลึงเกลียว มิล และ นิ้ว, กลึงองศา, กลึงเหล็ก-สแตนเลส-ไม้, ใช้ไฟฟ้า 220 โวลท์, รับประกัน 1 ปี
เหลือ 1 ชิ้น
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : เครื่องกลึงขนาดเล็ก (Mini Lathe)
  • รหัสสินค้า : 000108

รายละเอียดสินค้า เครื่องกลึงขนาดเล็ก รุ่น TU2406 คุณภาพดีจาก Optimum - Germany ราคาพิเศษ

 

PREMIUM TOURS AND PRECISION DESIGNED FOR DEMANDING USERS

 

  • Precision manufacturing, bench induction hardened (HRC 42-52) and ground (natural stabilization least 6 months)

  • Very high and constant torque
  • Equipped with a lead screw mounted on bearings lubricated threads for transactions and automatic longitudinal feed
  • To pin concentricity <0.009 mm, concentricity of the chuck <0.05 mm
  • Swivel top slide for taper turning
  • Carter turret protection, indexed turret 4 positions
  • All carriages and rails are hardened and precision ground
  • Automatic longitudinal feed
  • Double spindle mounted on tapered bearing with play catch-up
  • Wide possibilities threads through the treated steel gears
  • You can do the steps to the left
  • Equipped with a safety fuse gear
  • Spindle bearings guaranteed quality P5
  • +/- 5 mm lateral displacement of the tailstock for taper along
  • Chuck guard electrically controlled
  • Power reversal of rotation right / left on the front control panel
  • Emergency Stop "punch" with safety voltage
  • Produced according to DIN 8606 tools (clockwork precision)
  • Comes with Certificate of Tolerances


PRODUCTS DETAIL

  • กำลังมอเตอร์(Motor power)750 W 50 Hz ~
  • ความสูงจากศูนย์เหนือแท่น(Centre height)125 mm
  • ระยะกลึงจากหัวถึงศูนย์ท้าย(Entrepointes)550 mm
  • ระยะเหวี่ยงถึงแท่นสูงสุด(Machinable diameter max.)250 mm
  • ความกว้างของแท่นเครื่อง(Bench width)135 mm
  • ความเร็วรอบแกนหมุน(Spindle speed Vario)125 - 2000 T / min.
  • ย่านความเร็ว(Number of speeds)6
  • ความเรียวของแกนหมุน(Morse taper spindle)MT3
  • ขนาดรูผ่านหัวเครื่อง(Spindle bore)Ø 21 mm
  • ระยะเคลื่อนที่ของแกนบนสุด(Top slide travel)75 mm
  • ระยะเคลื่อนที่ของแกนขวาง(Stroke of cross slide)120 mm
  • ความเรียวศูนย์ท้าย(Morse taper of tailstock)MT 2
  • ระยะเคลื่อนที่ของยันศูนย์ท้าย(Stroke of tailstock sleeve)70 mm
  • ความเร็วป้อนแนวแกน Z (Longitudinal advances)0.1 to 0.2 mm / t.
  • ระยะระบบเมตริก(Metric thread)0.4 to 3.5 mm / t.
  • ระยะพิตนิ้ว(TPI)44-10 TPI
  •  
  • ขนาดเครื่องจักร(Machine dimensions (LxWxH)1310 x 520 x 560 mm
  • น้ำหนักเครื่องจักรสุทธิ(Net Weight (gross)125 kg (145 kg)
  • อุปกรณ์มาตราฐานประจำเครื่อง(Standard Accessories)Chuck 3 jaws Ø 125 mm, fixed edge CM2, fixed edge CM3, chuck guard, rear housing, chip tray, turret 4 positions, service keys, thread gears in treated steel, certificate tolerances manual

 



 

     Accessories
       Model
Detail
      Picture
      Other


SDJCR 1212H11


ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts



คลิ๊กดูรายละเอียด


SDJCL 1212H11


ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts



คลิ๊กดูรายละเอียด


SCLCR 1212H06


ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts



คลิ๊กดูรายละเอียด


SCLCL 1212H06


ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts



คลิ๊กดูรายละเอียด


SER 1212H16


ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts



คลิ๊กดูรายละเอียด


SEL 1212H16


ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts



คลิ๊กดูรายละเอียด


MGEHR 1212H03


ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts



คลิ๊กดูรายละเอียด


S12M-SDUCR07


ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts



คลิ๊กดูรายละเอียด


S12M-SCLCR09


ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts




คลิ๊กดูรายละเอียด


      SNR 0012M11


   ด้ามมีดกลึงแบบเปลี่ยนเม็ดมีด Inserts      

          


  คลิ๊กดูรายละเอียด