Line ID: @scnc (ต้องมี @ นำหน้า)

เสต็ปไดร์เวอร์ รุ่น MX4660 ขับกระแสสูง 1.41 - 6.0A

฿21,800.00 ฿14,900
ตัวขับสเต็ปปิ้งมอเตอร์ ขับกระแสสูง 1.41 - 6.0A รับสัญญาณควบคุฒแบบ Pluse/Direction และ CW/CCW
เหลือ 10 ชิ้น
  • หมวดหมู่ : สเต็ปมอเตอร์ และชุดไดร์ฟ
  • รหัสสินค้า : 000060

รายละเอียดสินค้า เสต็ปไดร์เวอร์ รุ่น MX4660 ขับกระแสสูง 1.41 - 6.0A

 รุ่น MX4660 (ยังไม่รวมภาษีและค่าจัดส่ง)

 - รับประกันสินค้า 1 ปี

 - ค่าจัดส่ง EMS 60 บาท

 - ราคารวมภาษี 7% และค่าส่ง EMS แล้ว



  • Full control for up to 4 stepper motors of NEMA 17, 23, 24, or 34
  • Sophisticated stepper motor control based on the latest DSP technology
  • Built-in breakout board and I/O’s
  • Step & direction control
  • Input pulse smoothing for less jittering, higher torque, and quicker response
  • Extra low motor heating & noise
  • Extra smooth motor movement
  • Easy setup and quick configuration
  • Compact size & easy setup
  • 200 KHz maximum frequency for each axis
  • 20-60 VDC supply voltage
  • Convenient individual setting for each axis via DIP switches
  • 8 micro step settings of 200-12,800 (full to 1/64) for each axis
  • 8 output current settings of 1.41 - 6.0A for each axis
  • E-Stop input
  • Fault output
  • 8 general digital inputs including 4 high-speed (200 kHz) ones for 5th and 6th axis control
  • 6 general digital outputs
  • Two 12 VDC auxiliary power outputs
  • Automatic idle current reduction to 50%


Leadshine MX4660 is a 4-axis stepper drive with built-in breakout board and I/O's. It is specially designed to allow EASY andRAPID implementation for full control of 4 stepper motors of frame sizes 17, 23, 24, or 34. By taking step & direction commands, the MX4660 can be easily controlled by motion controllers, PLC’s, CNC software (e.g. Mach 3/4, EMC)…. This makes it ideal for many applications in industries such as CNC machinery (CNC routers, plasma, mills, laser welders, machining centers, jewelry mills…), electronics, semi-conductor, medical, textile, etc. for easy, quick and cost-effective implementation.

Based on the latest DSP technology and Leadshine’s advance stepper control algorithm, the MX4660 adopts features such as anti-resonance, multi-stepping, input pulse smoothing, automatic idle current reduction … It offers high precision, excellent torque, extra low noise, very low motor heating, and smooth driven motor movement. With the working voltage of 20-60VDC and output current up to 6.0A, the MX4660 can drive 4 two-phasestepper motors from NEMA 17 to 34 in full power with high reliability.

The MX4660 is easy to configure without the use of software. With the four DIP switches (one for each axis), a user can easily configure the output current to one of the eight 1.41-6.0A settings, and the micro stepping resolution to one of the eight 200-12,800 (full to 1/64 step) settings. Each axis can have its configurations different from any of other axes to meet its own control requirements.

A Leadshine MX4660 stepper drive has one E-Stop input, one analog input (0-10 VDC), one fault output, 8 general digital inputs, and 6 general digital outputs. This allows quick and easy I/O connections such as E-Stop, home/limit switches, VFD..., to save installation space & time, minimize wiring, increase system reliability, and cut costs. Through the 4 high-speed general digital outputs (200 kHz), the MX4660 also allows control expansion for 2 additional axes, which is ideal to control 5-axis and 6-axis machines/devices.

The MX4660 adopts modular design with 4 individual stepper drive boards. If any the drive boards malfunctions, a user can easily replace it with a SDM660 stepper drive module at minimal cost.



* Note: The MX4660 can also be used to power 4-phase (0.9°) stepper motors. In this case, there will be 400 full steps needed for each revolution. You need to make sure that the settings in your controller (motion controller, PLC, CNC control system…) are properly configured to reflect this requirement.

* * Pb-Free or CE/UL approved versions optional. Contact Leadshine or see more information in its hardware manual please.




DIP Switch Settings

Mechanical Specifications (unit: mm    1 inch = 25.4 mm)


Typical Connections


The Leadshine MX4660 4-axis stepper drive can be easily and rapidly implemented in stepper control systems for OEM applications such as CNC routers / engravers, CNC mills, CNC Cutters, Laser Welders,CNC waterjets, X-Y tables, dispensing machines, medical equipment, scientific instruments…



Its unique design with built-in breakout board and I/O’s fits seamlessly in many applications powered by many popular CNC systems such as Mach3, Mach4, EMC, WinCNC, etc.


คุณพงษ์ศักดิ์ ป่วนเทียน 

เบอร์ 081 3344 239