Line ID: @scnc (ต้องมี @ นำหน้า)

Stand Alone Motion controller รุ่น SMC6480

Ethernet supports multiple masters and slaves.,Pulse output rate up to 5 MHz,2~4 axes linear interpolation,2 axes circular interpolation,2 D/A and 2 PWM outputs for custom use
เหลือ 0 ชิ้น
  • หมวดหมู่ : ตัวควบคุมตำแหน่ง
  • รหัสสินค้า : 000088

รายละเอียดสินค้า Stand Alone Motion controller รุ่น SMC6480


  • Ethernet supports multiple masters and slaves.
  • TCP/IP protocol for long-range control
  • Pulse output rate up to 5 MHz
  • 2~4 axes linear interpolation
  • 2 axes circular interpolation
  • Multi-axis continuous interpolation
  • Good contouring performance with the advanced path planning software
  • Support BASIC programming
  • 2 D/A and 2 PWM outputs for custom use
  • Support touch screen and USB flash disk, easy-to-use



The SMC6480 is a high performance, Ethernet motion controller, which based on a 32-bit RISC CPU and a FPGA. It offers 1 axis  to 4 axes motion control for stepping motors or servo motors to accomplish various operations. The SMC6480 can operate stand-alone or interface to a PC and USB flash disk over Ethernet and USB interface.

In multi-axis operation, the SMC6480 provides linear interpolation by any 2, any 3, or even all-4 axes. Any 2 axes can perform circular interpolation. And the SMC6480 supports the continuous interpolation function. All interpolations are realized by hardware, so faster interpolation speed, better interpolation accuracy and higher stability.

The SMC6480 can work in stand-alone mode, and supports BASIC programming. The user can create and edit program with touch screen or on a PC before downloading the program to the controller over Ethernet or USB flash disk.


The SMC6480 supports master-slave control mode. The user can realize real-time control by using a computer as a master controller. The application software developed with VB/VC/C++ Build/LabView on master computer can control or communicate with the SMC6480 over Ethernet.





1.4.4-3737400-B11: 2-meter (6.6-foot) extension cable between the controllers and terminal board.



 SMC6480G Program Examples

Program Examples for the SMC6480G.

 SMC6480G Libraries

DLL Libraries for the SMC6480G.

 SMC6480G Motion

Test and Configuration Software for the SMC6480G.

 SMC6480G Manuals

Hardware and Software Manuals for the SMC6480G.









สินค้าที่เกี่ยวข้อง Stand Alone Motion controller รุ่น SMC6480