Line ID: @scnc (ต้องมี @ นำหน้า)

เสต็ปไดร์เวอร์ รุ่น MX3660 ขับกระแสสูง 1.41 - 6.0A

฿17,400.00 ฿12,000
ตัวขับสเต็ปปิ้งมอเตอร์ ขับกระแสสูง 1.41 - 6.0A รับสัญญาณควบคุฒแบบ Pluse/Direction และ CW/CCW
เหลือ 10 ชิ้น
  • หมวดหมู่ : สเต็ปมอเตอร์ และชุดไดร์ฟ
  • รหัสสินค้า : 000059

รายละเอียดสินค้า เสต็ปไดร์เวอร์ รุ่น MX3660 ขับกระแสสูง 1.41 - 6.0A

 รุ่น MX3660 (ยังไม่รวมภาษีและค่าจัดส่ง)

 - รับประกันสินค้า 1 ปี

 - ค่าจัดส่ง EMS 60 บาท

 - ราคารวมภาษี 7% และค่าส่ง EMS แล้ว


  • Power up to 3 stepper motors of NEMA 17, 23, 24, or 34
  • Sophisticated stepper motor control based on the latest DSP technology
  • Built-in breakout board and I/O’s
  • Step & direction Control
  • 200 KHz maximum frequency for each axis
  • 20 - 60 VDC supply voltage
  • 1.41 - 6.0A output current per axis
  • 8 micro step settings: 1, 1/2, 1/4, 1/8, 1/10, 1/16, 1/32, 1/64
  • 8 output current settings of 1.41 - 6.0A for each axis
  • Damping and anti resonance
  • Allowing individual output current & micro step settings for each axis
  • Input pulse smoothing for less jittering, higher torque, and quicker response
  • Extra low motor heating & noise
  • Extra smooth motor movement
  • Simple micro step & output current configuration via DIP switches
  • Fault output
  • Compact size and easy setup
  • 50% automatic idle current reduction


The Leadshine MX3660 is a high performance 3-axis stepper drive with built-in breakout board and I/O’s based on the latest DSP technology. It is specially designed for EASY and RAPID control of up to three 2-phase (1.8°) in frame sizes NEMA 17, 23, 24, and 34. The MX3660 3-axis stepper drive operates under 20-60 VDC input voltage and can output up to 6.0A current (peak of sinusoidal) per axis. It takes step & direction control and is easy to implement for OEM applications.

By adopting Leadshine advanced stepper motor control technology, the MX3660 3-axis stepper drive can power stepper motors in high precision, at extra smoothness, and with extra low motor heating & noise. It is featured with anti resonance, multi-stepping, vibration suppression, input command smoothing, 50% idle current reduction, etc.

The MX3660 3-axis stepper drive is easy to configure. Via the 6-pin DIP switch of each of the 3 stepper drive modules, a user can easily set the output current and micro step to one of their 8 available settings, 1.45-6.0A and full step - 1/64 respectively. Each axis can have its own current & micro step configurations to satisfy different requirements for the controlled stepper motor. For example, a user can set axis X at 8 micro step & 6.0A for a NEMA 34 motor, axis Y at 10 micro step & 2.83A to drive a NEMA 23 motor, and axis Z at 16 micro step & 1.41A to for a NEMA 17 motor.

The MX3660 3-axis stepper drive is integrated with a breakout board with a DB25 connector and built-in I/O’s. This allows convenient, easy and quick connection for controllers (e.g. PC-based control systems, motion controllers, PLC’s…) and external devices (limit switches, VFD…). It simplifies system setup, save installation space & time, minimize wiring, increase reliability, and cut costs. In addition, the MX3660 offers a built-in digital “smoother” to allow filtering/smoothing of "noise" pulses for better system performance (application dependant).

The MX3660 adopts modular designs. If any of the three stepper drive modules malfunctions, a user can simply replace it with a Leadshine SDM660 stepper drive module at minimal cost.

* Note: The MX3660 can also be used to power 4-phase (0.9°) stepper motors. In this case, there will be 400 full steps needed for each revolution. You need to make sure that the settings in your controller (motion controller, PLC, CNC control system…) are properly configured to reflect this requirement.

* * Pb-Free or CE/UL approved versions optional. Contact Leadshine or see more information in its hardware manual please.





DIP Switch Settings

Mechanical Specifications (unit: mm    1 inch = 25.4 mm)

Typical Connections


With integrated breakout boards and built-in IO’s, Leadshine MX3660 3-axis stepper drives can be easily implemented as general purpose stepper drives to power 3 two-phase stepper motors in frame size 17, 23, 24, and 34. They are ideal solutions to many applications with 2-3 axis stepper systems such as CNC machinery, electronics, semiconductors, medical, packaging, lab automation, etc. They can be easily adopted in stepper control systems for machines like CNC routers / engravers, light-duty CNC mills, CNC lathes / Cutters, laser cutters / markers / engravers, CNC welders, waterjet cutters, X-Y tables, CNC dispensing machines, medical equipments…

The unique design of MX3660 with DB25 connectors makes it fit seamlessly with many popular CNC control systems like Mach3 and EMC.


คุณพงษ์ศักดิ์ ป่วนเทียน 

เบอร์ 081 3344 239